How to Fix Automatic Repair Loop in Windows 10

Having automatic repair loop in Windows 10? It’s a very common problem, but there are many ways of how to fix it. The most straightforward and uncomplicated way of how to fix a long automatic repair loop is to reset Windows 10 by going back to the date of installation.

What Causes a Windows 10 Automatic Repair Loop?

Windows 10 will run an automatic repair of your Windows every so often. It will do this without your explicit permission. It actually does it about once a day. If Windows can’t repair itself, it will reboot. This boot cycle happens a couple times every day, depending on how often you shut down, start, or restart Windows. If you’re a power user, you probably never see this error. If you’re more of a casual user, you might see this error once a day.

Fix Windows 10 Automatic Repair Loops in Windows (and Microsoft Store)Microsoft did this to force a Windows automatic repair fix to all the Windows PCs that are in Windows 10 PCs.Windows can’t repair itself. If this happens, the easiest fix is to boot to a Windows repair menu item or the Windows Store. It might reboot a couple of times. When it’s finished, you’ll see the normal shutdown screen.

1. Disconnect or Remove Recently Installed or Connected Devices

If possible, remove or disconnect any recently added devices and the PCs they’re connected to, such as an external keyboard or mouse. If the problem continues, remove any additional peripherals, including external hard drives.If these peripherals are internal, use the USB connection that connects these devices to your PC and boot into Safe Mode.You can also use the Safe Mode options to remove or disconnect the connected devices while in Safe Mode.2. Turn on Windows 10’s Windows Recovery Environment If you’re booting into Safe Mode, you can then open the Windows Recovery Environment (WinRE) from the Start menu by clicking the “WinRE” option.The Windows Recovery Environment is a tool that contains more advanced built-in repair tools than the standard Recovery options in Windows 10.

2. Run System Repair Tools (Chkdsk, SFC)

For many issues, you can run tools on your hard drive to remove and repair files and corrupted system files. This is often necessary, especially on systems that have frequent issues or are getting error messages. The Windows chkdsk repair tool will find errors or damaged files and replace them with copies of the original files in a way that your Windows 10 PC can repair itself.The system file checker (sfc) utility allows your system to automatically scan various files and remove faulty files to prevent them from causing further problems.These repair tools will be very helpful for getting past repair errors. However, if the issue is caused by missing or outdated Windows drivers, you may want to explore replacing or updating the hardware.

How to Fix a Windows 10 Repair Loop with SFC. Click the link to know how fix the Problem by going through SFC.

3. Run the Windows 10 DISM tool

If you are still having problems, and you’re using Windows 10 Enterprise or higher, you can use the Windows DISM command to inspect and repair issues with a Windows 10 PC’s boot structure. It’s not a simple boot repair solution, and if you run into any problems, you should ask in the Windows help forums or contact Microsoft for assistance.

If you’re using Home and Windows 10 Pro, or if you’re working with Windows 10 Home, you can use the Windows DISM tool to check for, repair, and/or report on existing problems, such as:

Microsoft’s Windows 10 Recovery Toolkit is a new tool released in the Windows 10 October 2018 Update that helps you diagnose and remove problems that could keep your Windows PC from booting.

4. Disable Automatic Startup Repair to Limit Boot Loops

Many people end up with Windows 10 auto repair loops because of a corrupted startup repair utility. This program scans your system during auto-boot and can tell what’s causing your PC to boot into a repair loop, so you don’t have to guess as to which problem caused your Windows 10 boot into a repair loop. In most cases, disabling automatic startup repair will allow Windows to boot normally.

5. Turn Off SmartScreen

Windows 10 SmartScreen comes to the rescue again here, where it prevents non-wanted content from getting downloaded from the internet.You’ll receive several warnings and prompts while using Windows 10, especially when you’re using Microsoft Edge.The best way to stop the annoying SmartScreen prompts is to turn off SmartScreen entirely.

6. Restore Registry and Software

If Windows 10 is continuously rebooting, it likely means a damaged or corrupted system (registry, drivers, or software) is causing the problem.

Fix Automatic Repair loop in Windows 10

I just moved my hard drive, so I have to repair windows 10 on my new hard disk. I have Windows 10 64-bit on my new hard disk. My old hard disk was 32-bit and I changed it to 64-bit when I moved. I tried installing 10 and it worked fine, but now I have a few problems. When I boot up I get into recovery and then I try to run “repair” on the command line. When I do that it takes me right back to repair. I am not sure that it works. I am using a USB hard drive.

I also tried running the Windows 10 ISO file and that did not work or get past the starting screen. I use an Acer notebook with Intel i7, 256 GB of RAM, and an Intel GPU. I used to have Windows 8.1 on this hard disk, but I upgraded to Windows 10 for some reason.


: So, as you can see, everything is working fine now, but the car has this problem that everytime it wants to turn off, it turns off. I am not really sure this is a huge problem, but since I am going to have to drive on these roads (which are really terrible roads) and I do not want to drive on these roads with a car that will not last very long at all. I know this may be a slight inconvenience for you, but I know this happens to other people, and I thought this was going to be a long problem.

Leave a Reply

Your email address will not be published. Required fields are marked *